Triumph Scrambler 1200 XC - Service manual
- Introduction
- General Information
- Ignition System Safety Precautions
- Safety Instructions
- Chassis Bearing Lubrication
- Fuel Handling Precautions
- Electrical Testing
- Tracing Circuits
- Service Tools
- Routine Maintenance
- Scheduled Maintenance
- Engine Check For Fluid Leaks
- Air Filter Element - Renew
- Valve Clearance Adjustment
- Tyres - Check For Wear/Damage
- Headstock Bearings
- Drive Chain and Sprocket Wear Inspection
- Engine Covers
- Cylinder Head
- Barrels and Pistons
- Clutch
- Crankcase, Crankshaft and Connecting Rods
- Balancer
- Transmission
- Starter Drive and Sprag Clutch
- Lubrication
- Engine Remove and Install
- Fuel and Exhaust System and Engine Management
- Engine Management
- Diagnostics and Testing
- Pinpoint Tests - Fuel
- Removal and Installation - Fuel and Air Components
- Removal and Installation - Engine Management Components
- Front Suspension
- Rear Suspension
See also:
> Battery
REMOVAL Remove the glove compartment Undo and remove the screw (1) Remove the negative cable from the battery (2) Refit the screw (1) along with the yoke in the specific seat Lift the protective boot (3) Undo and remove the screw (4) Remove the positive cable (5) Refit the screw (4) along with the yoke in the specific seat Remove the battery (6)
> Introduction
This manual is designed primarily for use by trained technicians in a properly equipped workshop. However, it contains enough detail and basic information to make it useful to the owner who desires to perform his own basic maintenance and repair work. The work can only be carried out if the owner has the necessary hand and special service tools to complete the job.