Moto Guzzi V85 TT - Service manual > Installing
- Insert the spacer (1)
- Place the front wheel (2) between the fork stanchions
- Insert the wheel pin (3)
- Insert the washer (4)
- Insert and tighten the nut (5)
- Tighten the screws (6)
- Tighten the screws (7)
- Correctly place the right front brake calliper (8)
- Insert and tighten the screws (9)
- Correctly place the right front brake calliper (10)
- Insert and tighten the screws (11)
- Position the ABS sensor (12) on the calliper mounting bracket
- Insert and tighten the screws (13)
- Insert the ABS sensor cable in the cable glands (14)
FRONT BRAKE DISCS INSTALLATION
The following procedure is described for a single brake disc, but is valid for both front brake discs.
- Place the front brake disc (1)
- Place the phonic wheel (2)
- Insert and tighten the screws (3)
FRONT WHEEL BEARINGS INSTALLATION
- Using an appropriate punch, install the wheel bearing as illustrated in the figure
- Insert the dust cover (1)
- Rotate the wheel and repeat the entire operation from the opposite side of the wheel to install the second bearing
See also:
Moto Guzzi V85 TT - Service manual > Removal
Removal Place a support under the vehicle and secure it using belts so that the wheel can move freely and the vehicle does not fall. Remove the ABS sensor cable from the cable glands (1) Unscrew and remove the screws (2) Remove the ABS sensor (3) from the front right fork Unscrew and remove the screws (4) Remove the front left brake calliper (5) from the brake disc Unscrew and remove the screws (6) Remove the front right brake calliper (7) from the brake disc Loosen the screws (8) Loosen the screws (9) Unscrew the nut (10) and remove it. Retrieve the washer (11) Remove the wheel axle (12) Remove the front wheel (13) Retrieve the washer (14)
Moto Guzzi V85 TT - Service manual > Rear wheel
Rimozione Undo and remove the screw (1) Holding the pin (3) in place, unscrew and remove the nut (2) Retrieve the washer (4) Remove the pin (3) Remove the brake calliper support plate (5) from the brake disc, complete with rear brake calliper Remove the rear wheel (6) Retrieve the bushing (7)