Royal Enfield Bullet Trials Works Replica - Owner's Manual > Gear Shifting, Riding & Stopping

NOTE

• Release the Starter button as soon as the Engine starts.
• If Engine does not start, wait for 30 seconds before pressing the starter switch.
• A Clutch switch is provided in the system for the safety of the rider. When the motorcycle is in gear, the motorcycle cannot be started. To start in gear depress the clutch lever and press Starter button to start engine.
• Warm up engine for 2 minutes.
• Depress clutch lever.
• Press gear pedal with toe to engage 1st gear. 
• Gently open throttle and release clutch lever simultaneously. If clutch is released suddenly, the engine may stall and cause the motorcycle to move with a jerk.
• To shift to 2nd and higher gears close throttle, depress clutch lever and press the gear pedal with heel. 

To stop the motorcycle, close throttle, apply front and rear brakes. Simultaneously, shift gears into neutral just before the motorcycle comes to a complete stop.

• Turn the ignition switch to 'OFF' position.

Prior to starting, check to see if the low fuel indicator is glowing continuously.

Low fuel indication will glow continuously, if the fuel level in tank is below 3.5 litres approx. 

See also: