Fantic Caballero 500 - Owner's Manual > Fuel resistance setting

Press the adjustment button ("ADJUST") to select the number to be set.

The resistance values which can be selected are: 100 Ω, 250 Ω, 510 Ω and 1200 Ω.

Correct fuel resistance value: 100 Ω.

It is advisable, if the exact value is not known, not to change the preset value. In case of need, contact an Authorized Fantic Motor Center.

After completing the setting, press once and hold the selection button ("SELECT") to display the next setting view.

When the fuel resistance value is changed, the remaining distance is reset to 0 and learning is restarted.

Clock setting

Press and hold the selection button ("SELECT") and release it when the desired digit is displayed.

During the modification, the selected digit will continue to flash.

This is a clock with 24-hour format. The setting follows the order from hours to minutes.

Press the adjust button ("ADJUST") to select another digit to change.

At the end of the adjustment, press once and hold the selection button ("SELECT") to display the next setting view.

Dashboard backlight setting

Press and hold the adjustment button ("ADJUST") and release it when the desired illumination value is selected.

Lighting values range from 1-5 (darker) to 5-5 (lighter). The brightness of the dashboard changes immediately after setting the value.

At the end of the, press once and hold the selection button ("SELECT") to confirm and to display the next setting view.

Internal total odometer screen setting

Press once and hold the selection button ("SELECT") to display the next setting view.

External total odometer screen setting

Press and hold the selection button ("SELECT") until the desired digit is displayed.

Then, press the adjust button ("ADJUST") to change the digit to be changed.

Once the desired value has been set, press once and hold the selection button ("SELECT") to confirm and return to the main screen.

Dashboard main screen after applying the customized settings.

See also: