Royal Enfield Bullet Trials Works Replica - Owner's Manual > Control cables
The following simple maintenance activities will help in maintaining your motorcycle. However for an elaborate maintenance, we recommend you to get in touch with a Royal Enfield Authorised Dealer / Service Center.
CONTROL CABLES
Lubricate after water washing motorcycle or if used during rainy conditions.
HAND LEVER PIVOTS
Wipe the area free of dirt / grease.
Apply a few drops of oil on the pivots.
CENTER / SIDE STAND PIVOTS
Apply a few drops of oil on the pivots after cleaning the area of dirt.
DRIVE CHAIN
Clean the drive chain carefully. Apply chain lubricant while simultaneously rotating the rear wheel. Wipe off the excess lubricant.
OIL LEVEL INSPECTION
- Place motorcycle on its center stand on a firm surface.
- Warm up engine for a few minutes & switch off before checking oil level.
- The level is correct if the oil level is in the middle of the oil level window.
- Top up only with recommended Engine oil.
C A U T I O N
Use of wrong grade or spurious oil can seriously affect motorcycle performance & damage to moving parts.
See also:
Royal Enfield Bullet Trials Works Replica - Owner's Manual > Spark plug
CLEANING AND ADJUSTING PLUG GAP Remove the spark plug cap from the spark plug. Remove spark plug using the plug spanner and tommy bar. Clean the insulator tip and electrodes of the plug carefully. Check and set the electrode gap between 0.80 to 0.90 mm. Refit the spark plug on the cylinder head and refit the spark plug cap on the spark plug.